• 请输入产品关键字:
产品展示 > 日本(台湾)YUKEN油研 > YUKEN阀 > CRG-03-04-50,日本YUKEN油研遥控溢流阀

产品名称:CRG-03-04-50,日本YUKEN油研遥控溢流阀

产品型号:CRG-03-04-50

产品报价:

产品特点:CRG-03-04-50,日本YUKEN油研遥控溢流阀
The sub-plates are those for remote control relief valves.

CRG-03-04-50CRG-03-04-50,日本YUKEN油研遥控溢流阀的详细资料:

CRG-03-04-50,日本YUKEN油研遥控溢流阀

Remote Control Relief Valves
DT / DG-01
Threaded Connections / Sub-plate
Instructions
Pressure is limited by collars fitted. If a working pressure cannot be attained,
remove some collars. One collar is equivalent to 10 MPa (1450 PSI).
If the internal volume of the vent line is too large, chattering is likely to occur.
阀型号
号码
六角螺栓
日本的标准。 “JIS"和欧洲的设计标准。 N.美国设计标准。
DG-01 M5×45 B4。 0-24UNC×1-3/4 B4。 4
数量。
安装螺栓
附件
Approx.
Mass
kg (lbs.)
Valve Model
Numbers
DG-01
Japanese Standard "JIS" European Design Standard N. American Design Standard
Sub-plate
Model Numbers
Thread
Size
Sub-plate
Model Numbers
Thread
Size
Sub-plate
Model Numbers
Thread
Size
DGM-02-20 Rc 1/4 DGM-02-2080 1/4 BSP.F DGM-02-2090 1/4 NPT 0.7 (1.5)
Sub-plate
Sub-plates are available. Specify the sub-plate m odel num ber from the table above.
 When sub-plates are not used, the m ounting surface should
have a good m achined finish.
Sub-plates are available. Specify the sub-plate model num ber from the table above.
When sub-plates are not used, the mounting surface should
have a good m achined finish.
CRG-03-04-50,日本YUKEN油研遥控溢流阀

 如果你对CRG-03-04-50CRG-03-04-50,日本YUKEN油研遥控溢流阀感兴趣,想了解更详细的产品信息,填写下表直接与厂家联系:

留言框

  • 产品:

  • 留言内容:

  • 您的单位:

  • 您的姓名:

  • 联系电话:

  • 常用邮箱:

  • 详细地址:

  • 省份:

  • 验证码:

    请输入计算结果(填写阿拉伯数字),如:三加四=7
 相关同类产品:
台湾YUKEN卸荷溢流阀理想选择  PV2R1-25-F-RAB-4日本油研低噪声溢流阀,YUKEN产品规格  A70-L-R-01-CS-60榆次YUKEN比例先导式溢流阀产品 
SVPF-30-20-20台湾油研压力控制阀,YUKEN压力控制阀特性  DSG-03-3C4-D24-5台湾油研减压阀,YUKEN减压阀选型资料  榆次油研电磁溢流阀,YUKEN电磁溢流阀操作方式 
油研电液换向阀台湾产品,介绍YUKEN电液换向阀  YUEKN电-液比例溢流调速阀说明书  原装YUKEN功率放大器,油研功率放大器用途 
榆次油研叠加式减压阀,YUKEN叠加式减压阀特性 

沪公网安备 31011402005368号